No interrupts are being shared ;-(
take a look
CPU0
0: 155590 XT-PIC timer
1: 3 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 1534436 XT-PIC wcfxo
4: 49926 XT-PIC serial
7: 1534528 XT-PIC wcfxo
8: 1 XT-PIC rtc
9: 44112 XT-PIC eth0
10: 1524594 XT-PIC wcfxs
11: 1534575 XT-PIC wcfxo
12: 0 XT-PIC PS/2 Mouse
14: 14536 XT-PIC ide0
NMI: 0
LOC: 0
ERR: 0
MIS: 0
> On Wed, 2003-10-01 at 06:32, Paulo Mannheimer wrote:
> > Hi folks,
> >
> > I'm still having the following problem, maybe someone can help me out of
> > it.
> >
> > Two IDENTICAL MACHINES (same motherboard, same RH 7.2, same *)
> > communicate through IAX2. Everything works ok on machine 1. On machine
> > 2, if I try to use 4 fxo's from a TDM400 card, sound gets lousy. If I
> > manually destroy one of the zap channels (e.g. zap destroy channel 4),
> > sound gets good again.
> >
>
> Did you check interrupts? Try "cat /proc/interrupts" and see if
> anything is sharing an interrupt.
>
> Jared Smith
>
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
