So, are you saying 'msn=' parameter is not required for both Point to Point and Point to Multi Point?
thanks -r On 10/20/05, John Daragon <[EMAIL PROTECTED]> wrote: > Voicomm User wrote: > > Hello > > > > Hardware: Eicon Diva 4BRI ISDN Card > > Software : Asterisk : Asterisk CVS-v1-0-08/13/05-19:51:52 > > Chan Capi: chan_capi-0.6 > > > > We are using an Eicon 4BRI ISDN Card here in Australia with Asterisk, > > connected to 4 OnRamp services with Telstra. > > > > There are 8 available channels, but after upgrading to latest capi > > driver we notice that the box is not able to handle more than 2 calls > > at the same time. An engaged signal is heard at the other end. After > > this happens once, some calls fail even when all channels are free. > > I don't see any messages on console for failes calls. Even when I turn > > on 'capi debug' and 'set verbose 20'. > > > > The telstra personnel have confirmed busy signal is sent out by the > > PABX. But its bizarre not to see any messages. No error messages are > > logged as well. > > > > capi info : > > Contr1: 2 B channels total, 2 B channels free. > > Contr2: 2 B channels total, 2 B channels free. > > Contr3: 2 B channels total, 2 B channels free. > > Contr4: 2 B channels total, 2 B channels free. > > > > capi.conf > > > > [general] > > nationalprefix=0 > > internationalprefix=00 > > rxgain=0.8 > > txgain=0.8 > > > > [isdn] > > isdnmode=ptp ; Is this correct for Point to Point Mode? > > msn=<8 digit local number> > > group=1 > > incomingmsn=* > > controller=1,2,3,4 ; there are 4 controllers > > devices=2 ; should this be 8? > > softdtmf=on > > relaxdtmf=on > > accountcode= > > context=main-menu > > echocancelold=yes > > ;echocancel=yes ; Turning this on gives a error message each time a > > call is terminated. > > usecallerid=yes > > callerid=asreceived > > ;echosquelch=1 > > ;echotail=64 > > ;callgroup=1 > > ;pickupgroup=1 > > The syntax has changed a bit. Time was when the "devices=" line > basically said "OK, that's this controller done with, let's commit that > and start on the next one..." With 0.6 (if I read it correctly) it goes : > > [general] > . > . > > [some_string] > > group=1 > isdnmode=did <-- note this has changed [DID/MSN] > incomingmsn=* > rxgain=1.0 > txgain=0.8 > controller=1 > softdtmf=0 > accountcode= > context=from-pstn > echosquelch=0 > echocancel=yes > echotail=64 > devices=2 > > [some_other_string] > > group=1 > isdnmode=did > incomingmsn=* > rxgain=1.0 > txgain=0.8 > controller=2 > softdtmf=0 > accountcode= > context=from-pstn > echosquelch=0 > echocancel=yes > echotail=64 > devices=2 > > Hope this helps... > > jd > > > -- > > John Daragon [EMAIL PROTECTED] > argv[0] limited > Lambs Lawn Cottage, Staple Fitzpaine, Taunton, TA3 5SL, UK > v +44 (0) 1460 234068 f +44 (0) 1460 234069 m +44 (0) 7836 576127 > > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
