thank you for your answer
I discovered that two lines, and now i removed the error in writing to the
device (the device was not freed by faxgetty)
now the problem is spandsp, If I call from a fax machine it rings 5-6 times
and then it goes away (remote hungap)
Unfortunately I am not able to compile spandsp, maybe it could be a
perl-module problem ? (!?)
No problem in compiling spandsp 0.0.3.pre4, but they are not OK for me
Andrea
"Julian J. M."
<[EMAIL PROTECTED]
om> To
Sent by: Asterisk Users Mailing List -
asterisk-users-bo Non-Commercial Discussion
[EMAIL PROTECTED] <[email protected]>
m.com cc
Subject
25/10/2005 17.25 Re: [Asterisk-Users] iaxmodem
Please respond to
Asterisk Users
Mailing List -
Non-Commercial
Discussion
<[EMAIL PROTECTED]
ists.digium.com>
For hylafax to answer a call, you need to use faxgetty.. Add this 2
lines to your /etc/inittab and run "init q" to force a reload:
IAX:2345:respawn:/usr/local/bin/iaxmodem ttyIAX
modem:2345:respawn:/usr/sbin/faxgetty ttyIAX
Change the paths according to your system.
Julian J. M.
On 10/25/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> Probably you are right
>
> I installed hylafax and configured it to use iaxmodem, but I didn't start
> it
> Now I will research how to start hylafax, and I will try again
>
> Andrea
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
