What are you plugging into the FXO port? I have two SPA-2000's. One
is connected to an SBC POTS line and the other to a Vonage Cisco
ATA186. The SPA3k connected to the SBC POTS passes CID info, the one
connected to the Cisco ATA will not. I have tried many things
mentioned at AAH SF.net site and Voxilla's forums (and probably a few
others) and was never able to get it to pass the CID info. According
to the Samurize program and the SPA3k web page, the SPA3k is
receiving the CID info from the Cisco ATA. I gave up and now I have
my Vonage line forward all calls to my Teliax account.
I'm running 3.1.3(GWa) on both units.
At 09:37 AM 10/26/2005, you wrote:
Following the instructions at http://geekgazette.com, I have the SPA-3000
setup as a SIP trunk. This is working flawlessly with one exception, it
isn't passing caller ID. Regardless of what settings I have tried, I can't
seem to figure this out. Has anyone else got it to work?
-Kerry
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
