I followed your steps to the letter but after resetting to factory defaults unfortunately it still doesn't record the configuration changes I do.
2005/11/9, Adam Moffett <[EMAIL PROTECTED]>: > If you unplug the ethernet cable on a Sipura SPA and then reset the > power it'll boot up in a diagnostic mode. When you pick up the phone > that's connected to it you'll get a dialtone and there are speical codes > you can dial to do various things. > > Reset it to factory defaults by dialing **** followed by 73738# > full instructions are here: > http://www.sipura.com/Documents/faq/Section_3.html#4 > > Once you do that the provisioning enable should be "no" and you can > reconfigure the device however it needs to be. > > >Hi, > > > >Thanks for your response. > > > >I checked the setting, and indeed it was set to "yes". However, once I > >change it to "no" and click on "apply" but after rebooting it's enabled > >again (with all settings reverted to factory defaults, as usual). > > > >Maxi. > > > >2005/11/8, Rusty Dekema <[EMAIL PROTECTED]>: > > > > > >>It's possible that your SPA-2000 is set up to read a configuration file from > >>a remote host every time it boots up, which would overwrite any changes you > >>make. If you log in as admin and go to the advanced view, there is an option > >>under the Provisioning tab called Provision Enable. Make sure that this is > >>set to "no" and your changes should remain in place. > >> > >> -Rusty > >> > >> > >> > >>On 11/8/05, Maximiliano J. Goldsmid <[EMAIL PROTECTED]> wrote: > >> > >> > >>>Hello, > >>> > >>>I have a problem with my Sipura 2000. > >>>The problem is that it does not accept any change in the configuration. > >>> > >>>When I access to it, via browser or phone, and make any change, after > >>>clicking "submit all changes" all the changes I made dissapear and teh > >>>configuration remains with the original parameters. > >>> > >>>So I need to know how can I work it out. > >>> > >>>Thank you very much. > >>>Maxi > >>> > >>>_______________________________________________ > >>>--Bandwidth and Colocation sponsored by Easynews.com -- > >>> > >>>Asterisk-Users mailing list > >>>[email protected] > >>> > >>> > >>> > >>http://lists.digium.com/mailman/listinfo/asterisk-users > >> > >> > >>>To UNSUBSCRIBE or update options visit: > >>> > >>> > >>> > >>http://lists.digium.com/mailman/listinfo/asterisk-users > >> > >> > >>> > >>> > >>_______________________________________________ > >>--Bandwidth and Colocation sponsored by Easynews.com -- > >> > >>Asterisk-Users mailing list > >>[email protected] > >>http://lists.digium.com/mailman/listinfo/asterisk-users > >>To UNSUBSCRIBE or update options visit: > >> > >>http://lists.digium.com/mailman/listinfo/asterisk-users > >> > >> > >> > >> > >_______________________________________________ > >--Bandwidth and Colocation sponsored by Easynews.com -- > > > >Asterisk-Users mailing list > >[email protected] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
