Hello, Yes, we have this kind of test setup in our office using a quad T1 card in each of two servers and cross-connecting each T1 to the other to test VICIDIAL for performance and compatibility.
A few notes, if you are going to use a PRI between the two servers make sure you set one to pri_cpe and the other to pri_net. If you use RBS T1s, they can have identical settings on each server. Good luck, MATT--- On 11/9/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Hello all, > > I'm thinking about to set up a test environment for a predictive dialler > with two asterisk machines. Each Asterisk should use a Digium TE110P card. > One machine should work as predictive dialler; the other box should simulate > the PSTN. > > - Is it in general possible to interconnect the two asterisk machines in > that way? Do I need any hardware in between to connect the two TE110P cards? > > > - Can I simulate the PSTN with a Digium TE110P card? > > Thanks and Regards > > Markus > > > > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
