Mabio Coelho wrote:
People,
I’m tring to use 2 e-1 in Brazil. In order to get R@ signaling, I
compilled libdsp, unicall and stuff following www.soft-switch.org
<http://www.soft-switch.org/> comparing with another site (Dezert of
Zazamora, in Mexico). Asterisk is running fine with Asterisk but I
can’t make calls.
The guys on the telco company tells me that I have a LOMF (Loss of
Multi Frame) error in their end (the far-end) and we can exchange
digits. They expect R2-Digital signaling and they think the
implementation I use is not quite right.
When I try to make a call the result is as follows:
Nov 11 12:02:13 VERBOSE[3451]: -- Executing Dial("SIP/200-3ced",
"UNICALL/g2/55431100") in new stack Nov 11 12:02:13 DEBUG[3451]: Using
channel 1 Nov 11 12:02:13 DEBUG[3451]: unicall_call called - 'g2/55431100'
Nov 11 12:02:13 DEBUG[3451]: unicall_call caller id - '"Mabio Coelho"
<200>'
Nov 11 12:02:13 WARNING[3451]: MFC/R2 UniCall/1 Call control(1) Nov 11
12:02:13 WARNING[3451]: MFC/R2 UniCall/1 Make call Nov 11 12:02:13
WARNING[3451]: Make call failed - Blocked Nov 11 12:02:13 DEBUG[3451]:
ast call on peer returned -1 Nov 11 12:02:13 DEBUG[3451]: Hanging up
channel 'UniCall/1-1'
Nov 11 12:02:13 DEBUG[3451]: unicall_hangup(UniCall/1-1) Nov 11
12:02:13 WARNING[3451]: MFC/R2 UniCall/1 Channel gains Nov 11 12:02:13
WARNING[3451]: MFC/R2 UniCall/1 Channel switching Nov 11 12:02:13
DEBUG[3451]: Hangup: channel: 1 index = 0, normal = 18, callwait = -1,
thirdcall = -1 Nov 11 12:02:13 DEBUG[3451]: Updated conferencing on 1,
with 0 conference users Nov 11 12:02:13 VERBOSE[3451]: -- Hungup
'UniCall/1-1'
Nov 11 12:02:13 VERBOSE[3451]: == Everyone is busy/congested at this time
I’m attaching the three most relevant configuration files. Sorry if is
kind of messy (a lot of lines commented out), that is because I tried
a lot of things before posting.
If the telco sees a loss of multi-frame sync from your end the problem
is nothing to so with the MFC/R2 code. Either you have the zaptel.conf
set incorrectly, or your line is faulty, or a card is faulty.
Steve
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
