Mabio Coelho wrote:
Steve,
The line is good, because we looped in my end and everything is ok.
Regarding the card, it might be faulty, but I doubt it because I've tested
with two cards.
My config files might be broken, that is why I've posted my config files in
my previous post but it got stripped by the list. So there we go:
Zaptel.conf:
# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: WPE1/0 "wanpipe1 card 0" HDB3/ RED
span=1,1,0,cas,hdb3
span=2,2,0,cas,hdb3
#
cas=1-15:1101
#dchan=16
cas=17-31:1101
#bchan=1-15,17-31:1101
#
cas=32-46:1101
#dchan=47
cas=48-62:1101
# Span 3: WCTDM/0 "Wildcard TDM400P REV I Board 1"
fxoks=63
fxoks=64
fxsks=65
fxsks=66
##alaw=63-66
##fxoks=32
##fxoks=33
##fxsks=34
##fxsks=35
# Global data
loadzone = br
defaultzone = br
I think that is the only file needed right?
Thanks for the quick feedback.
Mabio Coelho
If you are using a wanpipe card you need to get the wanpipe config files
right too.
Steve
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
