On Mon, 06 Oct 2003 13:43:21 -0500
Steven Critchfield <[EMAIL PROTECTED]> wrote:
> On Mon, 2003-10-06 at 10:12, Eduardo Goncalves wrote:
> > Hello,
> >
> > I have the fowling scenario:
> >
> > fxs[asterisk1]-----iax-----[asterisk2]e1----e&m---PSTN
>
> If asterisk2 is your only access to the PSTN, then it doesn't make a lot
> of sense to do fax over VoIP. Put a couple of modems on asterisk2 with
> matching FXS ports and learn to use Hylafax.
I can't. Because asterisk1 is at a remote site. And the only access to PSTN at
this remote site is trough asterisk2.
> performance out of the faxing and potentially lower bills. Also it is
> more flexible. Not to mention that the bandwidth over VoIP to make data
> quality calls is around 80k of VoIP to get flakey 9.6k. Do you need to
> waste 10x bandwidth for sub par functionality?
Is it possible to config asterisk1 to change to g.711 only when a fax
transmission is detected?
Thanks
Eduardo
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
