Fax with G711 works fine. Modem will be slow, but if you really need to use it slown them down to 28.8 or 33.6
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Eduardo Goncalves > Sent: Monday, October 06, 2003 2:56 PM > To: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] Modem and Fax over VoIP > > On Mon, 06 Oct 2003 13:43:21 -0500 > Steven Critchfield <[EMAIL PROTECTED]> wrote: > > > On Mon, 2003-10-06 at 10:12, Eduardo Goncalves wrote: > > > Hello, > > > > > > I have the fowling scenario: > > > > > > fxs[asterisk1]-----iax-----[asterisk2]e1----e&m---PSTN > > > > > If asterisk2 is your only access to the PSTN, then it doesn't make a lot > > of sense to do fax over VoIP. Put a couple of modems on asterisk2 with > > matching FXS ports and learn to use Hylafax. > > I can't. Because asterisk1 is at a remote site. And the only access > to PSTN at this remote site is trough asterisk2. > > > performance out of the faxing and potentially lower bills. Also it is > > more flexible. Not to mention that the bandwidth over VoIP to make data > > quality calls is around 80k of VoIP to get flakey 9.6k. Do you need to > > waste 10x bandwidth for sub par functionality? > > Is it possible to config asterisk1 to change to g.711 only when a > fax transmission is detected? > > Thanks > Eduardo > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
