Hi there,
Instead of asking a question, I thought I'd post an answer. I got the
Polycom IP501 'Park' softkey working with * by doing the following:
features.conf:
[general]
parkext => 1000
parkpos => 1001-1009
context => parkedcalls
parkingtime => 120
transferdigittimeout => 3
courtesytone = beep
Nothing unusual there. Here's the neat bit:
extensions.conf:
[internal] ; or whatever the relevant context is for you - it's usually
wherever your Polycom lives
include => parkedcalls
exten =>
callpark,1,ParkAndAnnounce(pbx-transfer:PARKED|120|SIP/
${DIALEDPEERNUMBER}|internal,${DIALEDPEERNUMBER},1)
By using SIP DEBUG, I discovered that the Polycom attempts to re-invite
the call to an extension called callpark. I couldn't get Park() to work
(it announces the stall number to the parked caller, instead of the
parker, for some reason), but using ParkAndAnnouce puts the parked call
on hold, hangs up the parker and then immediately calls them back with
an announcement of the stall number.
Hope this helps someone out......
Regards,
--
Anthony Rodgers
Business Systems Analyst
District of North Vancouver
Web: http://www.dnv.org
RSS Feed: http://www.dnv.org/rss.asp
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
