[EMAIL PROTECTED] wrote:
Hello everybody :-)
This are my first line french zapata.conf settings.
I have 3 like this, with only rx/tx gain a little bit different levels.
Running well.
Best Regards,
Francois BERGERET,
France.
usecallerid=yes
hidecallerid=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=2
txgain=6
group=1
callgroup=1
pickupgroup=1
immediate=no
busydetect=yes
busycount=3
busypattern=500,500
signalling = fxs_ks
channel => 1
-----Message d'origine-----
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de asterisk user
dupont
Envoyé : vendredi 18 novembre 2005 13:33
À : asterisk-users@lists.digium.com
Objet : [Asterisk-Users] In France asterisk never detect hang up. Why ?
Hello.
I am sorry my english is not good at all.
When i have a call from a fxo port of a tdm400p, asterisk waits one minute
before detecting that the caller has hang up his phone.
I have in my extension conf :
answer
background (the prompt is 40 second long)
dial (on fxs port) confgured for 30 seconds ringing.
if the caller hang up at the begining of the background prompt, asterisk
waits until he make ring the phone on the dial command for the all 30
secondes before detecting the hang up.
Do you know if there is a way to repair that ?
here is what i see on asterisk when the caller hang up IMMEDITALY after the
test prompt begins :
*CLI> -- Starting simple switch on 'Zap/4-1'
-- Executing Answer("Zap/4-1", "") in new stack
-- Executing NoOp("Zap/4-1", "0675458745") in new stack
-- Executing Set("Zap/4-1", "TIMEOUT(response)=20") in new stack
-- Response timeout set to 20
-- Executing BackGround("Zap/4-1", "barge") in new stack
-- Playing 'test' (language 'fr')
-- Executing Dial("Zap/4-1", "Zap/2|0675458745|30") in new stack
-- Called 2
-- Zap/2-1 is ringing
-- Zap/2-1 is ringing
-- Zap/2-1 is ringing
-- Zap/2-1 is ringing
-- Zap/2-1 answered Zap/4-1
-- Attempting native bridge of Zap/4-1 and Zap/2-1
-- Hungup 'Zap/2-1'
== Spawn extension (reseau, s, 5) exited non-zero on 'Zap/4-1'
-- Executing Hangup("Zap/4-1", "") in new stack
== Spawn extension (reseau, h, 1) exited non-zero on 'Zap/4-1'
-- Hungup 'Zap/4-1'
In my zapata.conf i have :
language=fr
default=fr
relaxdtmf=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
cidsignalling=v23
usecallerid=yes
group => 1
context=reseau
signalling=fxs_ks
callprogress=yes
busydetect=yes
callerid=asreceived
busycount=5
pulse=yes
In my zaptel.conf i have :
loadzone=fr
defaultzone=fr
fxoks=1-3
fxsks=4
If anyone can see what is wrong he will really help me.
thank you.
Your English is better than my French :-)
Making the TDM400p detect hangups can be hard. I had it working OK with
pre-1.2 versions, but now in 1.2 stable I'm also having some problems
again. I'll investigate in more details eventually.
For now, the only thing I can suggest is that you add:
hanguponpolarityswitch=yes
in your zapata.conf
In the UK, hangups are signaled by a polarity switch, and since
sometimes the UK and Europe do the same thing, I'm hoping this will be
the case for you too.
However, even with this option enabled, like I say, I'm having some
small problems with 1.2 stable. I hope to have time this weekend to
investigate and see what is going on.
Faris.
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
