------------------------ From: "James B. MacLean" <[EMAIL PROTECTED]>
---------------End of Original Message----------------- I hope the files that you attached have different names then what was shown since there is nothing used by * called zap.conf or zapa.conf. The parameters in zaptel.conf look correct "if" they match up with the appropriate modules (red & green) installed on the TDM boards. The parameters in zapata.conf appear to be a little wild. As the parameters are read, they are inherited by each section below it unless otherwise changed. So, usecallingpres=yes (as an example only) is inherited by each channel (regardless of whether you know it as a fxo or fxs port). Restructuring the contents might be a good place to start. I'd suggest removing the majority of the statements and starting out with very basic definitions, then when things are working reasonably well, add in other statements (like callerid, etc). You might also take a look at 'zap show status' and 'zap show channels' to ensure definitions are reasonable. Might also try 'set debug 99' and/or 'set verbose 99' and watch an outgoing call to see if additional info is provided on the CLI. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
