On Wed, November 30, 2005 13:54, Alejandro Vargas said: > 2005/11/30, Francesco Peeters <[EMAIL PROTECTED]>: >> Wrong order: First zaptel, then zaphfc. Do an lsmod to verify both are >> loaded before ztcfg > > Ok, now I will remove all and try. But when I applied Florz patch > every time I load zaphfc the system hangs. > > > First, when compiling zaphfc (after applying Florz patch) i see some > warnings: > > *** Warning: "zt_register" > [/usr/src/bristuff-0.3.0-PRE-1/zaphfc/zaphfc.ko] undefined! > *** Warning: "zt_receive" > [/usr/src/bristuff-0.3.0-PRE-1/zaphfc/zaphfc.ko] undefined! > *** Warning: "zt_transmit" > [/usr/src/bristuff-0.3.0-PRE-1/zaphfc/zaphfc.ko] undefined! > *** Warning: "zt_ec_chunk" > [/usr/src/bristuff-0.3.0-PRE-1/zaphfc/zaphfc.ko] undefined! > *** Warning: "zt_unregister" > [/usr/src/bristuff-0.3.0-PRE-1/zaphfc/zaphfc.ko] undefined! > > Ok, then... modprobe zaptel and... > [EMAIL PROTECTED] zaphfc]# insmod ./zaphfc.ko debug=3 > > (and the system hangs) Kernel panic, fatal exception. Is it necesary > the Florz patch?
Unless you are using a genuine Junghanns card, yes... It removes the hardware check they put in to make it only work with Junghanns hardware... (A somewhat futile and time-wasting exercise when dealing with Open Source IMHO) These are weird warnings... Have you done make clean before make? Have you first compiled the patched zaptel? -- Francesco Peeters ---- GPG Key = AA69 E7C6 1D8A F148 160C D5C4 9943 6E38 D5E3 7704 If your program doesn't recognize my signature, please visit http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
