Jason,
I added:
nat=never
qualify=no
and I still cant get a UIP200 to ring when calling it after using 1.2?
Any other suggestions?
Thanks,
Jerry
Jerry Geis wrote:
/ I have a handful of phones that work with 1.0.9. I was trying to upgrade
/>/ to 1.2
/>/ and the UIP200 phones dont ring.
/>/
/>/ below is my config for 1 phone.
/>/
/>/ I tried it with and without the qualify=yes or qualify=no and did not
/>/ seem to make
/>/ a difference. still no ring.
/>/
/>/ Any ideas on what might be the issue?
/>/
/>/ THanks,
/>/
/>/ Jerry
/>/ --------
/>/
/>/ ; Jerry Phone
/>/ [528]
/>/ type=friend
/>/ dtmfmode=rfc2833 ; Choices are inband, rfc2833, or info
/>/ username=something
/>/ secret=something
/>/ disallow=all
/>/ allow=ulaw
/>/ allow=alaw
/>/ host=dynamic
/>/ context=smvoice-sip
/>/ callerid="Jerry" <528>
/
Need to have:
nat=never (or nat=route)
Regards,
--
Jason Becker
Director & CEO
Coalescent Systems Inc.
Enabling Open Source Telephony
403.244.8089
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
