On Fri, 9 Dec 2005, David Waugh wrote: > Sorry Patrick, I was mistaken here. The Diva Server for Linux drives > currently only support Little Endian machines. Unfortunately the PPC based > chipsets use Big Endian.
The melware.net drivers (part of kernels 2.6) do support Big-Endian. Armin > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Patrick > Sent: 08 December 2005 21:18 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] Asterisk on PPC & chan_capi issue > > > On Thu, 2005-12-08 at 08:47 +0000, David Waugh wrote: > > Hello Patrick, > > > > I have an Eicon Diva PRI-30M card and use the Eicon Linux drivers with > > chan_capi_cm. > > I am able to do ISDN to SIP calls with this. > > > > Have you tried using the Eicon drivers instead, rather than zaptel and zib > > pri. > > > > Instruction for doing this can be found here: > > http://www.voip-info.org/wiki/view/Asterisk+Eicon+Diva+CAPI+ISDN > > > > I hope this help > > Unfortunately not. The config I described below works fine on an Intel > server. The box showing the issue is a PPC box. The author of > chan_capi-cm doesn't think there is anything wrong with chan_capi-cm on > PPC and the way it behaves in the logfiles below. So the problem seems > to be Asterisk & PPC related but I have no idea how to track down the > issue or solve it. > > Regards, > Patrick > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Patrick > > Sent: 06 December 2005 01:40 > > To: [email protected] > > Subject: [Asterisk-Users] Asterisk on PPC & chan_capi issue > > > > > > Hi all, > > > > I have a PPC box (IBM RS6000 43P-150, bigendian afaik) which runs Fedora > > Core 5 Test1 and zaptel, libpri and asterisk 1.2.0. I also installed > > chan_capi (0.6.1) so I can use my Eicon Diva Server BRI card. Asterisk > > was compiled with DEBUG=-g and DEBUG_THREADS = -DDUMP_SCHEDULER > > -DDEBUG_SCHEDULER-DDEBUG_THREADS -DDO_CRASH -DDETECT_DEADLOCKS. Next I > > did make clean, make valgrind, make install. Asterisk runs as user/group > > asterisk/asterisk. > > > > SIP <--> SIP calls are fine, Calls from SIP out to the PSTN via > > CAPI/ISDN are fine too. ISDN/CAPI --> SIP calls don't work. Example > > output of the issue is below. Anyone have an idea how I fix this? > > > > Thanks and regards, > > Patrick > > > > > > chan_capi registers fine: > > ********************************************************************** > > [chan_capi.so] => (Common ISDN API for Asterisk) > > == This box has 1 capi controller(s). > > == Reading config for BRI1 > > -- ast_capi_pvt BRI1-pseudo-D (<MSN1>,<MSN2>,capi-in,0,2) (1,4,128) > > -- ast_capi_pvt BRI1 (<MSN1>,<MSN2>,capi-in,0,2) (1,4,128) > > -- ast_capi_pvt BRI1 (<MSN1>,<MSN2>,capi-in,0,2) (1,4,128) > > -- listening on contr1 CIPmask = 0x1fff03ff > > == Registered channel type 'CAPI' (Common ISDN API Driver ($Revision: > > 1.115 $) ) > > == Registered application 'capiCommand' > > == Registered custom function VANITYNUMBER > > > > Call from my GSM to a SIP phone (exten 1003) via ISDN/CAPI (MSN2): > > ********************************************************************** > > == BRI1: Incoming call '<my GSM>' -> '<MSN2>' > > > > -- Executing Macro("CAPI/BRI1/<MSN2>-0", "stdexten|1003|SIP/1003") > > in new stack > > -- Executing Dial("CAPI/BRI1/<MSN2>-0", "SIP/1003|10|TtwW") in new > > stack > > Dec 6 02:30:47 WARNING[28889]: channel.c:2494 ast_request: No > > translator path exists for channel type SIP (native 65535) to 0 > > Dec 6 02:30:47 NOTICE[28889]: app_dial.c:1011 dial_exec_full: Unable to > > create channel of type 'SIP' (cause 0 - Unknown) > > == Everyone is busy/congested at this time (1:0/0/1) > > -- Executing Goto("CAPI/BRI1/<MSN2>-0", "s-CHANUNAVAIL|1") in new > > stack > > -- Goto (macro-stdexten,s-CHANUNAVAIL,1) > > -- Executing Goto("CAPI/BRI1/<MSN2>-0", "s-NOANSWER|1") in new stack > > -- Goto (macro-stdexten,s-NOANSWER,1) > > -- Executing Answer("CAPI/BRI1/<MSN2>-0", "") in new stack > > == BRI1: Answering for 703241494 > > -- Executing Wait("CAPI/BRI1/<MSN2>-0", "1") in new stack > > Dec 6 02:30:47 NOTICE[28889]: channel.c:1893 ast_read: Dropping > > incompatible voice frame on CAPI/BRI1/<MSN2>-0 of format alaw since our > > native format has changed to unknown > > Dec 6 02:30:47 NOTICE[28889]: channel.c:1893 ast_read: Dropping > > incompatible voice frame on CAPI/BRI1/<MSN2>-0 of format alaw since our > > native format has changed to unknown > > > > [snipped tons more of these] > > > > Dec 6 02:30:48 NOTICE[28889]: channel.c:1893 ast_read: Dropping > > incompatible voice frame on CAPI/BRI1/<MSN2>-0 of format alaw since our > > native format has changed to unknown > > -- Executing VoiceMail("CAPI/BRI1/<MSN2>", "u1003") in new stack > > Dec 6 02:30:48 WARNING[28889]: channel.c:2313 set_format: Unable to > > find a codec translation path from unknown to gsm > > Dec 6 02:30:48 WARNING[28889]: file.c:820 ast_streamfile: Unable to > > open vm-theperson (format unknown): No such file or directory > > == BRI1: CAPI Hangingup > > > CAPI INFO 0x3490: Normal call clearing > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
