Thanks for the responses. I guess the next step is to get a Digium TE210P. Are there any other 2 port PRI cards anyone would recommend for *?
-- Matt Burleigh Senior Systems Engineer Enterprise Integration, Inc. eiisolutions.com 703-236-0790 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Totaro Sent: Tuesday, December 13, 2005 10:49 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Partial PRI pass thru? > > I want to put a * server in front of our legacy phone system. Currently > this legacy system is connected to the CO with an ISDN PRI interface. > > With a dual PRI card in the * server can I only pass thru a certain > number of channels to the legacy phone system and then leave the other > half of the channels for Asterisk to use for a Meet Me conference bridge > configuration? Yes. > > Can I make the * server nearly invisible to the legacy phone system? Yes providing you set the settings on whatever span is connected to your PBX the same as your carrier's and no configuration changes are required on the PBX. > > The legacy phone system would only be able to use, for example, channels > 16-23 from the ISDN PRI coming out of the * server. You could assign specific zap channels but there is no need. Just define a number of channels and let asterisk decide which channels to use. > > CO---[ISDN PRI]--Asterisk--[ISDN PRI]--legacy phone system > > Thanks! > > -- > Matt Burleigh > Senior Systems Engineer > Enterprise Integration, Inc. > eiisolutions.com > 703-236-0790 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users