Bart, We have has similar issues with BroadVoice in the past. From what I understand they had problems with DTMF depending on which proxy you register to. This is a bug that related to their session border controllers which should have been resolved.
Looking at your config your first each account registers to a different BV POP (the IP address is of the first is different to the second account). Suggest the following course of action. 1. Try pinging each of the following BroadVoice POPs to find which is closest to you. proxy.nyc.broadvoice.com proxy.dca.broadvoice.com proxy.bos.broadvoice.com proxy.chi.broadvoice.com proxy.lax.broadvoice.com proxy.mia.broadvoice.com 2. Change your /etc/hosts file to so that the IP of the nearest POP from the list above is mapped to hostname sip.broadvoice.com NOTE: They did have problems with their LAX POP for DTMF. 3. Change your config file so all host entries point to sip.broadvoice.com instead of the 147.135.X.X IP address you're using at present! It make easier to make a single change to the /etc/hosts file for testing in future. 4. Change your DTMF mode from inband to rfc2833. BroadVoice does support out-of-band DTMF signalling, though their website is out of date. i.e. dtmfmode=rfc2833 5. You may want to check that your second "register =>" statement is on a new line in your config file! ;-) We have out-of-band DTMF working properly across 6 separate BV accounts and register to their proxy.nyc.broadvoice.com POP without problems. As an FYI, BroadVoice also seem to unofficially support G729, iLBX and G726 codecs. If bandwidth is a problem I suggest trying out G726. We've been using G726 instead of G711u for the past week and have been impressed with the results Regards Neil/ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bartosz Wegrzyn - asterisk Sent: Tuesday, December 20, 2005 8:31 PM To: [email protected] Subject: [Asterisk-Users] dtmf problem hi everyone, I do have 2 lines with broadvoice. >From 2 days on one line my dtmf tones are not passed to asterisk server. It siply goes through the extensions routine acting link it did not receive any tone. Could it be problem with my config??? It looks like this:(it worked for last 1.5 year) num2 is ok, but num1 is not working. Any ideas before I call support which is always a problem. [general] externip=lexon.ws bindaddr = 192.168.1.251 port=5060 localnet=192.168.1.0/255.255.255.0 disallow=all allow=ulaw register => number1:[EMAIL PROTECTED] register => number2:[EMAIL PROTECTED]/2000 tos=0x18 srvlookup=yes nat=never insecure=yes [sip.broadvoice.com] type=peer username=num1 fromuser=num1 authuser=num1 secret=pass1 host=sip.broadvoice.com context=sip fromdomain=sip.broadvoice.com canreinvite=no nat=never dtmfmode=inband [sip.broadvoice.com.home] type=peer username=num2 fromuser=num2 authuser=num3 secret=pass2 host=sip.broadvoice.com context=sip fromdomain=sip.broadvoice.com canreinvite=no nat=never dtmfmode=inband [broadvoice-incoming] type=peer host=147.135.8.128 context=from-broadvoice qualify=yes canreinvite=no disallow=all allow=ulaw nat=never [broadvoice-incoming2] type=peer host=147.135.0.128 context=from-broadvoice qualify=yes canreinvite=no disallow=all allow=ulaw nat=never [broadvoice-incoming3] type=peer host=147.135.4.128 context=from-broadvoice qualify=yes canreinvite=no disallow=all allow=ulaw nat=never thx Bart Wegrzyn _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
