Hi all, FYI, I had a similar problem where the new TDM card would show up in /proc/pci but would not load the module.
Checked out the latest CVS zaptel, made / installed and loaded straight away. Used Gigabyte GA-8S648 board. Stuart. On Fri, 2003-10-03 at 19:49, Mark Spencer wrote: > > > Is it showing up on /proc/pci? It should be a tigerjet. > > > > Yes. I put the other card back in (production machine) but over the > > weekend I'll get the card in there and capture the output of lspci. > > If the card shows up in /proc/pci then your motherboard *must* be > supplying 3.3V somehow (unless it's just leaking back somehow, but that > doesn't seem very likely). > > > Nope. Doesn't show any sign of seeing the card at all. It does see the > > FXO card that's in the same machine. > > We should check the PCI ID's. There may be a difference in what we're > looking for and what is there. > > Mark > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users -- | http://www.opusvl.com | T: 08717 50 40 02 | F: 08717 50 40 03 | E: [EMAIL PROTECTED] _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users