On Mon, 2 Jan 2006, Kristian Larsson wrote:
> I have an Avaya IP Office PBX connected to an > Asterisk system via a Sangoma ISDN PRI card. > Dialing from the as > terisk system into the avaya works just fine but > when trying to call from a phone connected to the > avaya syste > m something goes wrong. After punching the first > four digits the Avaya calls out, shouldn't it wait > for all di > gits and then dial out? > If I try to dial a three digit number it waits for > a while then dials. > > Is this some feature to let the CO know of which > area code the calls is going ahead of time? > Is there some way to circumvent this using hacks > on the asterisk side? Looks like you need to enable overlapdial=yes on the Asterisk side. It will then wait for additional digits sent from the Avaya after the initial ones sent with the SETUP. This goes in zapata.conf Steve _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
