On Mon, Jan 02, 2006 at 03:36:57PM +0200, [EMAIL PROTECTED] wrote: > > > On Mon, 2 Jan 2006, Kristian Larsson wrote: > > > I have an Avaya IP Office PBX connected to an > > Asterisk system via a Sangoma ISDN PRI card. > > Dialing from the as > > terisk system into the avaya works just fine but > > when trying to call from a phone connected to the > > avaya syste > > m something goes wrong. After punching the first > > four digits the Avaya calls out, shouldn't it wait > > for all di > > gits and then dial out? > > If I try to dial a three digit number it waits for > > a while then dials. > > > > Is this some feature to let the CO know of which > > area code the calls is going ahead of time? > > Is there some way to circumvent this using hacks > > on the asterisk side? > > > Looks like you need to enable overlapdial=yes on the Asterisk side. It > will then wait for additional digits sent from the Avaya after the initial > ones sent with the SETUP. I did try enabling overlapdial=yes but I saw no real change. Is there any other variable to go with it that I might need to tune?
I am quite new to the whole PRI thing. What does it do when setting up a call? First a SETUP and after that it dials? Regards, Kristian _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
