I am working on adding three older Cisco phones to *, two 12SPs and one 30VIP. One of the 12SPs (griffin) and the 30VIP (scott) is booting correctly and I have dial tone. The other 12sp starts up, then I get a message on the display stating Requesting Load ID, then it reboots. I am not sure why this is occurring. The phone does was working on a CCM installation not long ago. Below is the skinny.conf file. Anyone seen this issue?
;
; Skinny Configuration for Asterisk
;
[general]
port = 2000 ; Port to bind to, default tcp/2000
bindaddr = 192.168.1.51 ; Address to bind to
dateFormat = M-D-Y ; M,D,Y in any order (5 chars max)
keepAlive = 120
allow = all
; disallow =
; Typical config for 12SP+
[griffin]
device=SEP0010EB002A64
model=12SP
version=P00203010100
context=from-internal
line => 1234
[emma]
device=SEP00306409C932
model=12SP
version=P00203010100
context=from-internal
line => 1500
[scott]
device=SEP0010EB0013DF
model=30VIP
version=P00203010100
context=from-internal
line => 2000
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
