I'm running Asterisk on a Gentoo box with the Zaptel 1.2.1 drivers. If I boot the machine without having the wcfxs module autoload, then install the module with modprobe, asterisk works just fine.
If I boot the machine and autoload the wcfxs module, the module loads fine: > Jan 11 11:06:55 asterisk Zapata Telephony Interface Registered on major 196 > Jan 11 11:06:55 asterisk ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 > Jan 11 11:06:55 asterisk PCI: setting IRQ 10 as level-triggered > Jan 11 11:06:55 asterisk ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] > -> GSI 10 (level, low) -> IRQ 10 > Jan 11 11:06:55 asterisk Freshmaker version: 73 > Jan 11 11:06:55 asterisk Freshmaker passed register test > Jan 11 11:06:55 asterisk Module 0: Installed -- AUTO FXS/DPO > Jan 11 11:06:55 asterisk Module 1: Not installed > Jan 11 11:06:55 asterisk Module 2: Not installed > Jan 11 11:06:55 asterisk Module 3: Installed -- AUTO FXO (FCC mode) > Jan 11 11:06:55 asterisk Found a Wildcard TDM: Wildcard TDM400P REV I (2 > modules) The module is running: > asterisk sfbosch # lsmod > Module Size Used by > wctdm 39936 - > zaptel 226756 - > asterisk sfbosch # But Asterisk behaves as though it were not: > [chan_zap.so] => (Zapata Telephony w/PRI) > == Parsing '/etc/asterisk/zapata.conf': Found > Jan 11 11:32:53 WARNING[5778]: chan_zap.c:920 zt_open: Unable to specify > channel 1: No such device or address > Jan 11 11:32:53 ERROR[5778]: chan_zap.c:6847 mkintf: Unable to open channel > 1: No such device or address > here = 0, tmp->channel = 1, channel = 1 > Jan 11 11:32:53 ERROR[5778]: chan_zap.c:10251 setup_zap: Unable to register > channel '1' > Jan 11 11:32:53 WARNING[5778]: loader.c:414 __load_resource: chan_zap.so: > load_module failed, returning -1 > Jan 11 11:32:53 WARNING[5778]: loader.c:554 load_modules: Loading module > chan_zap.so failed! > Warning, flexible rate not heavily tested! > asterisk sfbosch # Ouch ... error while writing audio data: : Broken pipe Looking at this now as I write this, it seems that some module dependencies aren't loading, but I can't be sure. Does anybody have an idea what's going on here? -Stephen- _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
