Any cheaper, equally reliable way to do this? Looks like a base Rhino channel bank with a 4 port FXS card will run me about $900.
---- Begin Original Message ---- From: Jerry Jones <[EMAIL PROTECTED]> Sent: Wed, 11 Jan 2006 12:46:35 -0600 To: Asterisk Users Mailing List - Non-Commercial Discussion<[email protected]> Subject: Re: [Asterisk-Users] Recommend Fax Hardware for T1 PRI On Jan 11, 2006, at 11:12 AM, C F wrote: > You could use a 2 span T1 card from Digium and plug one span into a > channel bank, and have FXS ports on the CB for the fax machines. With > the latest firmwares from Digium these streams are bridged internaly > on the card, and don't even come on to the PCI bus. I can vouch this works very well. I do so with a 4port card and 1 or 2 Adits. All the traffic stays TDM and just works. Although I am presently exploring using 24port FXS devices peering with T1 gateway devices to replace this. Much more flexibility. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ---- End Original Message ---- Sent by Go2net Mail! _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
