Due to some failed hardware on another platform, I've had to move a T100P card to a different chassis. After this move was completed, I am seeing some strange results on the T100P card that do not display to me any failure mode with which I am familiar. The card comes up, and shows "good" carrier and status, but Asterisk refuses to bring the D-channel up. Calls of course do not complete, inbound or outbound. The configuration on the system is identical to what I had on the same PRI before I disconnected it. The PRI checks out clean when connected to another Asterisk system. So, it must be something with this particular motherboard or hardware configuration, but is there anything I can do to solve the problem?
Searches through the archives and Google do not show anything relevant on this error message that I was able to find.
Hardware Specs: - Intel 440GX+ motherboard - 500mhz PIII processor - 1u case (horizontal PCI card - no, it's not shorting out)
If I run asterisk -vvvvvvvvgcd I get a whole slew of these lines (all identical) in the stderr output:
DEBUG[13326]: File chan_zap.c, Line 6201 (pri_dchannel): Got event No event (0) on D-channel for span 1
From dmesg: _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
