Hi again, I'm trying to setup our non pri T1 (they call it a Long Distance T1), our current pbx has the signaling set to E&M, I can set em in zapata.conf, but I'm trying to track down the proper entries for the zaptel.conf file. The digium docs only show a PRI example. Our current system has these settings:
Signalling: E&M Framing mode: ESF Line Coding: B8SZ here's my bastardized entry right now (this doesn't work) span=1,1,0,esf,b8zs #fxsks=1-23 asterisk won't start like this & shows the following: Jan 13 11:18:41 ERROR[4610] chan_zap.c: Signalling requested on channel 1 is E & M Immediate but line is in FXS Kewlstart signalling Jan 13 11:18:41 ERROR[4610] chan_zap.c: Unable to register channel '1-23' Jan 13 11:18:41 WARNING[4610] loader.c: chan_zap.so: load_module failed, returning -1 Jan 13 11:18:41 WARNING[4610] loader.c: Loading module chan_zap.so failed! Is there a setting other than fxsks,fxsgs,fxsls that I should use for these lines? (i.e. something like fxsem?) Thanks in advance _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
