zaptel.conf: span=1,1,0,esf,b8zs e&m=1-24
zapata.conf: ;we are using e&m wink, not e&m, so this is just reference for us. context=from-pstn signalling=em_w emdigitwait=500 rxwink=300 immediate=no rxgain=0.0 txgain=0.0 busydetect=yes group=0 channel=> 1-24 -- -- Steven May you have the peace and freedom that come from abandoning all hope of having a better past. --- - --- - - - - - - - -- - - - --- - ------ - - --- - - -- - - - -- - - - "Dan Elder" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > Hi again, I'm trying to setup our non pri T1 (they call it a Long Distance > T1), our current pbx has the signaling set to E&M, I can set em in > zapata.conf, but I'm trying to track down the proper entries for the > zaptel.conf file. The digium docs only show a PRI example. Our current > system has these settings: > > Signalling: E&M > Framing mode: ESF > Line Coding: B8SZ > > here's my bastardized entry right now (this doesn't work) > > > span=1,1,0,esf,b8zs > #fxsks=1-23 > > asterisk won't start like this & shows the following: > > Jan 13 11:18:41 ERROR[4610] chan_zap.c: Signalling requested on channel 1 is > E & M Immediate but line is in FXS Kewlstart signalling > Jan 13 11:18:41 ERROR[4610] chan_zap.c: Unable to register channel '1-23' > Jan 13 11:18:41 WARNING[4610] loader.c: chan_zap.so: load_module failed, > returning -1 > Jan 13 11:18:41 WARNING[4610] loader.c: Loading module chan_zap.so failed! > > Is there a setting other than fxsks,fxsgs,fxsls that I should use for these > lines? (i.e. something like fxsem?) > > Thanks in advance > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
