Iax.conf [general] ;bindport = 4569 ; Port to bind to (IAX is 4569) bindport = 5036 ; Port to bind to (IAX is 4569) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) disallow=all allow=g729 ; 4 simultaneous allowed allow ilbc ; prefered for iax2 allow=gsm ; 13 Kbps (full rate), 20ms frame size allow=ulaw ;(g711)64 Kbps, sample-based allow=alaw ;(g711)64 Kbps, sample-based mailboxdetail=yes jitterbuffer=yes
context=from-internal #include iax_additional.conf #include iax_custom.conf iax_additional.conf [1055] username=1055 type=friend secret=##################### record_out=Adhoc record_in=Adhoc qualify=yes port=4569 notransfer=yes [EMAIL PROTECTED] host=dynamic context=from-internal callerid=device <1055> Regards ianC -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Francesco Peeters (Asterisk) Sent: 27 January 2006 15:22 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] External IAX2 phone defined as internal behaving as from PSTN On Fri, January 27, 2006 16:09, Ian Cowley said: > Have [EMAIL PROTECTED] 1.2.1 > The server is on an internal network eg 10.10.10.10 > It is NAT'd 1:1 via Checkpoint firewall to external public IP eg > 50.50.50.50 > > The remote IAX2 phone (ATCOM320) is configured to call 50.50.50.50 on > extension 1055. > Outbound calls to 1055 work perfectly. > Inbound calls from 1055 get picked up as if it were an external call > (see below) and goes straight to the ring group macro. > The same phone either on the same internal network to the asterisk or on > a VPN to said network work fine. Obviously asterisk thinks this call is > external. > How do change this? > <SNIP> The actual iax.conf part pertaining to this phone might be helpful here... -- F Peeters PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch 2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0 Cologne HFC-S pins #52, #54, #55 connected in parallel for synching. AMD Duron 1GHz - 1GB - * 1.2.1 2 Sweex HFC-PCI cards _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ________________________________________________________________________ This Inbound email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com ________________________________________________________________________ ________________________________________________________________________ This email has been scanned for all viruses by the MessageLabs Email Security System. For more information on a proactive email security service working around the clock, around the globe, visit http://www.messagelabs.com _______________________________________________________________________ This e-mail message and any attachments may be confidential and may also be a privileged communication. It is intended solely for the person(s)to whom it is addressed. If you are not the intended addressee of the message you must take no action based on it. Please reply to this message to let us know you received it in error and also delete the message from your system. This disclaimer confirms that MessageLabs have swept e-mail and attachments for viruses on behalf of RSM Moffat Ltd. However it does not guarantee that either are virus-free and accepts no liability for any damage sustained as a result of viruses. #### RSM MOFFAT LTD Registered in UK. [EMAIL PROTECTED] #### _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
