> Just figured I'd offer my experience with power restrictions and the > 2400P... > > When I purchased a Dell 2800 series tower I found that there were no > Molex power connectors in the box so I thought I was out of luck if I > wanted to use *any* FXS card (TDM400 or TDM2400) in this box. I spoke > with the guys at Digium about power requirements for the card and ended > up buying an external power supply (Altech PS-4512: > http://www.wolfautomation.com/Product.aspx?ProductID=17140&CategoryID=2725)
> , coaxial power connectors and some shrink wrap from Radio Shack. > > I can not remember exactly what the power requirements per Quad FXS > module were but I am sure Digium can provide that. The guys at Digium > also mentioned they were looking into an external solution like this for > the same reason I was -- I just needed a solution that day :) > > I would assume you could use a solution like this to provide the > required power to the X number of cards in a system. I can post some > pictures of my solution if anyone is interested. Please do. Someone IS interested! :) > ** Please note, Digium did not suggest this or condone this... ** Caveat emptor, please don't do it at home, we're trained professionals etc etc etc. ;) Juan __________________________________________________________ Mensagem enviada usando o Webmail da ViaLink ver. 2.7.8 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
