Looks like channel 25 is not the one hooked up to your POTS, when an incoming call arrives, what channel does the CLI report?
On 2/1/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Thanks for the reply. I have tried adding anywhere between 1 and 6 w's to > the dial string, but still no luck. I hooked up and listened on the line > when the call went out, and never heard any DTMF's. I'm sure this must be > something simple, I just can't seem to figure out for the life of me what it > is. What other information can I provide to help sort this out? > > Thanks again, > James > > ------------------------------ > You could insert a pause by adding a w before the number to be dialed, > like this: > Dial(zap/25/w1234567890) iirc each w puts a 500ms pause. > > > On 1/30/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > > > I am experimenting with an asterisk setup in my office. The last bit I > > > have to test is working with analog lines. I have TE411p digium card, > > > with an ISDN line plugged into the first, a channel bank plugged into the > > > second port, and the last two ports empty. I have the following setup in > > > my zaptel.conf: > > > > > > span=1,1,0,esf,b8zs > > > bchan=1-23 > > > dchan=24 > > > > > > span=2,0,0,d4,ami > > > fxsks=25 > > > > > > And in zapata.conf, I have: > > > group=2 > > > language=en > > > context=from-pstn > > > signalling=fxs_ks > > > channel=>25 > > > > > > I have one analog line plugged in for testing. If I dial that analog > > > number, the inbound call arrives, and it works great. However, when I > > > place an outbound call, I get the following output: > > > -- Called g2/5148346 > > > -- Zap/25-1 answered SIP/412-9b72 > > > > > > However, my number never rings. After about 30 seconds, I get a message > > > saying my call could not be completed as dialed. Almost like it didn't > > > get all of the digits. Is there a way to inject a pause before dialing? > > > Any other thoughts? Any help is greatly appreciated. > > > > > > _______________________________________________ > > > --Bandwidth and Colocation provided by Easynews.com -- > > > > > > Asterisk-Users mailing list > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
