Yes, I actually just removed the VPM. After doing so, I had echo at
the beginning of the call, but it trained out after a second at least
making it usable. I plan on contacting digium support this morning. Do
you know if there are any docs specific to this card or the vpm module
itself?
--Stagg
www.oneringnetworks.com
Kevin P. Fleming wrote:
Stagg Shelton wrote:
I just implemented a system using a TE411P hardware echo cancellation
card. Per Digium, I setup zaptel.conf, and zapata.conf the same way as
I always have. To my surprise calls out to the PSTN had a terrible
echo. 1 - 2 second delay, and quite clear. The echo was so bad that I
1 to 2 _seconds_? There is no echo canceler anywhere that will handle
that much echo delay.
Did you actually remove the VPM, or just disable it? Please check
whether you have this problem with the VPM installed but disabled,
because it could be a bad VPM.
Finally... I know it's Sunday night, but you should really pursue this
with Digium Support tomorrow morning :-)
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
