I have a call in with the carrier, below is the PRI debug, looks like it is getting hungup because of "Invalid Number format", I did try to use Setcallerid to change the callerID to a DID number in a previous attempt, but it still didn't go through. Not sure if that "invalid number format" is the calling number or the number I'm calling. I'll let the list know the result.
I would encourage everyone to test their 911 functionality (especially if you have a PRI), I almost didn't check it. The PRI is up and 411 works, so I almost assumed that 911 would work. Make sure you call the police station first to make sure they are not swamped by real emergency calls and let them know you are testing .
-- Executing NoOp("SIP/3251-7316", "3251") in new stack
-- Executing Dial("SIP/3251-7316", "Zap/g2/911") in new stack
-- Making new call for cr 33144
-- Requested transfer capability: 0x00 - SPEECH
> Protocol Discriminator: Q.931 (8) len=44
> Call Ref: len= 2 (reference 376/0x178) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a2]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0)
> Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
> Ext: 1 User information layer 1: u-Law (34)
> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 1 ]
> [1e 02 80 83]I>
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: User (0)
> Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ]
> [28 09 b1 52 65 63 70 74 69 6f 6e]
> Display (len= 9) Charset: 31 [ Recption ]
> [6c 06 41 80 33 32 35 31]
> Calling Number (len= 8) [ Ext: 0 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> Presentation: Presentation permitted, user number not screened (0) '3251' ]
> [70 04 a1 39 31 31]
> Called Number (len= 6) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '911' ]
-- Called g2/911
< Protocol Discriminator: Q.931 (8) len=9
< Call Ref: len= 2 (reference 376/0x178) (Terminator)
< Message type: RELEASE COMPLETE (90)
< [08 02 82 9c]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2)
< Ext: 1 Cause: Invalid number format (28), class = Normal Event (1) ]
-- Processing IE 8 (cs0, Cause)
-- Channel 0/1, span 2 got hangup
On 2/7/06, Mark Phillips <[EMAIL PROTECTED]> wrote:
I dunno about your provider but I know that 2 of my 3 MCI PRI circuits
have no 911 abilities. MCI tells me this is becasue I have no local
dialing plan on them.
Mark, G7LTT/KC2ENI
Randolph, NJ
http://www.g7ltt.com
Michael Collins wrote:
> 911 **should** work on a PRI. If you are getting a hangup and you don't
> see a valid hangupcause, it might be best to get your carrier on the
> line and have them monitor the circuit while you dial 911. They might
> be able to tell you what the problem is.
>
>
>
> -MC
>
>
>
> ------------------------------------------------------------------------
>
> *From:* [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] *On Behalf Of *Joe Pukepail
> *Sent:* Tuesday, February 07, 2006 10:10 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* [Asterisk-Users] 911 and ISDN PRI
>
>
>
> Does asterisk support this? I have a location that I planned to only
> put a PRI line, but testing 911 (I called them first), I just get a
> hangup. Does 911 normally work over a PRI line? Anything special I
> have to setup in asterisk?
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
