Mark Farver wrote:
I must be doing something stupid, but I can't figure it out.
I have three PRI lines connected to Asterisk, one from the phone
company, and two more connected to PBXs. Asterisk uses the incoming
DID information to decide which PBX to route the call to. Should be
simple.
Asterisk is clearly getting the caller id info from the phone company:
-- Accepting call from '512345xxxx' to '039' on channel 0/3, span 3
But the PBXs upstream never seem to get callerid from asterisk. I
believe the PBX's are configured correctly, since if they are plugged
into the phone company PRI directly they handle caller id correctly.
It seems like I am missing something in my zapata.conf, but I'm not
sure from reading the docs what it is (since I thought caller id info
was inserted by default)
You can enable debug on the PBX spans and see if the caller id is being
sent in the SETUP message.
--
Andres
Technical Support
http://www.telesip.net
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
