For the poster place a test jack on the end that connects to the smart jack. Make it as so: Pin 1 -> 4 Pin 2 -> 5
This document will explain how to use the zaptel tools to run a pattern loop on a zaptel interface (T1) with an external hard loop. Please have a T1 loopback plug or jack with cable available. The pin out should be pin 1 -->4 and pin 2 -->5. Make sure the span is in OK (no alarms) then configure the span as follows in zaptel.conf: span = 1,0,0,esf,b8zs clear = 1-24 Then run ztcfg -vv to configure the channels. The channels must be configured for esf/b8zs and each span needs it's own clear = x-x line. Now you can build and run the tests. cd /usr/src/zaptel make tests ./patlooptest /dev/zap/1 60 Going for it... Thanks go to Neil Lewis @ Digium Technical Support for this document. Info about lines config and reasons why things may not work deleted. > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
