On 2/13/06, nik600 <[EMAIL PROTECTED]> wrote: > On 2/13/06, Michael Collins <[EMAIL PROTECTED]> wrote: > > When Asterisk first starts up, it will attempt to "bring up" the B > > channels on any PRI circuits. If you are using [EMAIL PROTECTED] then you > > can log on > > to the Asterisk CLI (asterisk -r) and then do "stop now" to stop > > asterisk. Start up Asterisk again by typing asterisk -cvvv at the Linux > > command line. You should see a bunch of messages on the terminal and > > then you'll get the Asterisk CLI prompt. A few moments later you should > > see some more messages saying something like "B channel 1/1 successfully > > started on span 0" and then "B channel 1/2 successfully started..." I > > don't have my system active at the moment but when I do I'll email you a > > screen capture of the messages I see on my PRI. > > > > i get: > *CLI> == Primary D-Channel on span 1 up > > at the moment i've got only one span connected...il the message correct? > Description Alarms IRQ bpviol CRC4 T2XXP (PCI) Card 0 Span 1 NOP 0 0 0 T2XXP (PCI) Card 0 Span 2 RED/NOP 0 0 0 ZTDUMMY/1 1 UNCONFIGUR 0 0 0 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users