Hi, Im so confused regarding Telmex specification of my ISDN PRI line. The following is the line specification from Telmex: ---------------------------------------------------- Phisical interface:g703 coding: hdb3 signalling:isdn pri clock: recover crc4: yes framing:pcm30 or cas In case you have a Cisco device: controller E1 X/X/X framing CRC4 (esto depende de como esta armado del otro extremo) pri-group timeslots 1-31
interface SerialX/X:15 no ip address load-interval 30 no snmp trap link-status isdn switch-type primary-net5 isdn incoming-voice modem isdn T310 120000 isdn negotiate-bchan isdn sending-complete isdn outgoing-voice info-transfer-capability 3.1kHz-audio no cdp enable ----------------------------------------------------- 1) Is it possible to have CAS framing with no R2? Could be my zaptel.conf look like this? ; no "cas=" defined here cause the driver assigns that to MFCR2 span 1,1,0,cas,hdb3,crc4,yellow bchan=1-15 bchan=17-31 dchan=16 Some help needed Thanks in advance Oscar Andrés Carriles -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 267.15.7/259 - Release Date: 13/02/2006 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
