What version of chan_capi do you use? Your capi.conf is for an old chan_capi. If you use an old version, please update to chan_capi from sourceforge.net and adapt your capi.conf.
Armin On Tue, 21 Feb 2006, cédric Buzay wrote: > Hi everybody. > > I'm trying to setting up a V4 BRI EICON card on ASTERISK 1.0.7 > My linux is a debian. > It was working during a few days an suddenly (after a lot of reboot) > I've got this error message that seems to be very popular but I couldn't > find any > answer on the net : > > ==============================================. > Asterisk Dynamic Loader Starting: > == Parsing '/etc/asterisk/modules.conf': Found > [chan_capi.so] => (Common ISDN API for Asterisk) > == Parsing '/etc/asterisk/capi.conf': Found > Feb 21 03:08:34 NOTICE[10319]: chan_capi.c:2645 load_module: unable to > listen! > Feb 21 03:08:34 WARNING[10319]: loader.c:345 ast_load_resource: > chan_capi.so: load_module failed, returning -1 > == Unregistered channel type 'CAPI' > Feb 21 03:08:34 WARNING[10319]: loader.c:391 load_modules: Loading > module chan_capi.so failed! > =============================================== > > I've got all the persmissions on the .conf files and on the /dev/capi20 > > my drivers are those : > dmesg | grep -i capi > Eicon DIVA - CAPI Interface driver (http://www.melware.net) > divacapi: Rel:2.0 Rev:1.24 Build: 105-75(local) > divacapi: module unloaded. > Eicon DIVA - CAPI Interface driver (http://www.melware.net) > divacapi: Rel:2.0 Rev:1.24 Build: 105-75(local) > > and they work at a CAPI level : > > Update CFGLib information ... succeeded > Start adapter Nr:1 - 'Diva Server V-4BRI-8', SN: 23208 ... OK (already > active) > Successfully updated configuration of Diva Server V-4BRI-8 PORT: 0 SN: > Successfully updated configuration of Diva Server V-4BRI-8 PORT: 1 SN: > Successfully updated configuration of Diva Server V-4BRI-8 PORT: 2 SN: > Successfully updated configuration of Diva Server V-4BRI-8 PORT: 3 SN: > Successfully updated configuration of Diva TTY driver > Successfully updated configuration of Diva MTPX driver > Successfully updated configuration of Diva CAPI driver > > My modules.conf seems correct: > ================================================= > [....] > noload => app_intercom.so > ; > ; Explicitly load the chan_modem.so early on to be sure > ; it loads before any of the chan_modem_* 's afte rit > ; > ; load => chan_modem.so > ; load => res_musiconhold.so > load => chan_capi.so > ; > ; Load either OSS or ALSA, not both > ; By default, load OSS only (automatically) and do not load ALSA > ; > noload => chan_alsa.so > noload => chan_oss.so > > ; > ; Module names listed in "global" section will have symbols globally > ; exported to modules loaded after them. > ; > [global] > ;chan_modem.so=yes > chan_capi.so=yes > > And my capi.conf also : > > ; > ; CAPI config > ; > ; > [general] > nationalprefix=0 > internationalprefix=00 > rxgain=0.8 > txgain=0.8 > > [interfaces] > msn=0MYNUMBER0 > incomingmsn=* > controller=1 > ; softdtmf=1 > ; accountcode= > context=demo > ;echosquelch=1 > echocancel=yes > ; echotail=64 > ; callgroup=1 > ; deflect=12345678 > devices=2 > ================================================= > > Any ideas ??? > > Thanks > > Cédric > > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
