Hi everyone, our setup includes a NEC PBX connected to our asterisk via bri lines. The NEC has a doorphone feature, which is just an extension that calls you when someone rings. When connected to this extensions, a 'flash' signalling opens the door.
So now, i'd like to trigger this from asterisk, too, but unfortunately wasn't able to do so. Setup: asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1k, Quad-Bri Junghanns Card, Bris set on p2pte. What I tried and didn't work: * Using Flash() in dialplan - doesn't work since channel is Dial()-ed and doesn't allow applications at that very moment * Typing *0 on phone => zap channel doc says this should send flash, but doesn't seem to work in bridged scenarios (ZAP=>*=>ZAP or SIP=>*=>ZAP) * Typing # on phone => as of documentation, this sometimes emulates flash => not in my setup * Tried the above from snom sip phone, sip ata with analogue phone and flash-key, mobile phone called in via another zap channel => no difference between the incomings Has somebody any hints for me? Stefan -- Stefan Märkle Netpioneer GmbH Leitender Systemarchitekt Beiertheimer Allee 18 <[EMAIL PROTECTED]> 76137 Karlsruhe *** Besuchen Sie uns vom 09.03.- 15.03.2006 auf der Cebit 2006 in Hannover. Sie finden uns in Halle 3 auf Stand D31 als Mitaussteller der Imperia AG *** _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
