John Joseph wrote:
Hi
On fresh install ( both OS and Zaptel ) after
modifying /etc/zaptel.conf
as
fxsks=2
loadzone=us
defaultzone=us
when I do “ztcfg -vv “ , I get the following
error
Channel map:
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
1 channels configured.
ZT_CHANCONFIG failed on channel 2: No such device or
address (6)
[ even with fxsks=1 ] I get error similar
Even when we give “modprobe wctdm” for the first time
, it gives some error message , but giving the command
again , it wont show any error
I am confused and lost , I do
not know how to solve this problem
I am using RHEL4 , Digium developer card
Help requested
Thanks
Joseph
John
Hi ,
this could a simple thing where you are mixing up signalling types for
FXO and FXS.
for example if i have 2 FXO (red)and 2 FXS (green)
the FXO is setup with FXS signailling and FXS with FXO signalling
so if my channels 1 and 2 is green and,
3 and 4 is red
rmmod wctdm
rmmod zaptel
[zaptel.conf]
fxoks=1-2
fxsks=3-4
[zapata.conf]
signalling=fxo_ks
channel =>1-2
signalling=fxs_ks
channel =>3-4
modprobe zaptel
modprobe wctdm
hope this helps
yusuf
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
