Adrian Carter wrote:
Tim Panton wrote:
On 13 Mar 2006, at 11:50, Adrian Carter wrote:
Its a Dlink DI714P+ router in a completly vanilla out-of-the-box
setup - so if IAX 'just works' - what am I missing?? :)
This is the bizare thing... those same clients on SIP do exactly that...
but the NAT clients all end up being only on port 4569 and only allowing
one connection... meanwhile I can have numerous SIP connections that
look just like your IAX ones below... Same client - fires up Idefisk and
uses his IAX device login and he gets register timeout after the first
client connects (on port 4569).
Im going to junk the DI714 tomorrow (dlink mumble grumble grrr) and
replace it with a more .. ahem.. full featured router. See if that helps
at all. Im just at a loss as to what is different between the SIP
connections and IAX through this router... there is no discernible
config 'in the way' that would cause different behavious - beyond the
port numbers used.
You might check to see if there is newer firmware available for the
dlink before junking it.
Had some similar issues with an older linksys and a firmware upgrade
addressed the problem.
If you're really interested in what the dlink is doing, use ethereal on
the inside and outside edge of the box and see what its doing. Its not
that hard to figure out.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
