Hi You need to use a cross-over E1 cable (not an ethernet cross-over one) Good luck Jose Manuel Cortes David X Semestre Ingenieria Electronica PONTIFICIA UNIVERSIDAD JAVERIANA
________________________________ De: [EMAIL PROTECTED] en nombre de David Masure Enviado el: Mié 15/03/2006 9:41 Para: [email protected] Asunto: [Asterisk-Users] problem configuring a digium quad E1 card Hi, I bought a Digium Quad E1 card model TE406P. Till now, I can't make it work... I mean, I have red alarm when I configure one E1. The provider is in France (France Télécom) and I use the following zaptel config : span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 I'm using Linux 2.6.15 and when I run ztcfg -vvvv, it seems that all channels are configured... So can someone give me an advice on that matter... maybe someone in France who already configured that type of access. Also, I would like that you confirm the type of cable which can be used to connect the card to the Telco : can I use a straight cable or use a crossed cable with pair 1-2 connect to 4-5 ? Thanks Best regards! David
<<winmail.dat>>
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
