On Mar 24, 2006, at 1:19 PM, George Vagenas wrote:
Hi all,
I have the following problem, working with a SIP provider, if i setup
my SJPhone to register directly to their STUN server and working over
a 384/128 ADSL i have a really good quality, but then if i configure
Asterisk to register to the same provider over the same 384/128
circuit the quality is REALLY BAD. The obvious difference is that
using directly the SJPhone i am using STUN, while when i am using
Asterisk to connect to my SIP provider and the SJPhone to connect to
Asterisk i have the following configuration for Asterisk.
register => user:[EMAIL PROTECTED]
[mysip]
host=sip.provider.com
type=peer
qualify=yes
username=user
secret=pass
nat=yes
disallow=all
allow=ulaw
I am using Asterisk 1.2.3.
I think that i am missing something or misconfigure something because
for sure its not matter of the ADSL since in both tests i am doing i
am using the same circuit.
Any idea please????
I don't think using ulaw on a 128K bit upstream circuit is a good
choice. I would use g729.
Marty
PS I can't be the stun server if asterisk is working, but quality is
poor.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
