I'vce got three Asterisk systems here that I'd like to be able to place
calls between with IAX. As usual, I've spent several hours playing with it,
really getting nowhere. Asterisk is so mentally draining. Each system, pbx1,
pbx2, pbx3, should be able to connect to every other. Do I need separate
user/peers or can I combine them into a single user=friend for each system? if
I place a call from pbx1 to pbx2 as pbx1_outbound, it should work.... the docs
say that pbx2 will look for a [pbx1_outbound] .... oh dear... this doesn't
make sense any longer.
Has anyone got a working example they could supply? Can I do all this
with just three peers and one username?
Thanks... Doug.
[pbx1_inbound]
type=user
auth=rsa
inkeys=pbx1
username=pbx1_inbound
deny=0.0.0.0
permit=xxx.187.142.203
context=global_pbx_transfer
[pbx1_outbound]
type=peer
auth=rsa
outkey=pbx1
username=pbx1
host=pbx1.ipt.yyy.com
[pbx2_inbound]
type=user
auth=rsa
inkeys=pbx2
username=pbx2_inbound
deny=0.0.0.0
permit=xxx.187.142.204
context=global_pbx_transfer
[pbx2_outbound]
type=peer
auth=rsa
outkey=pbx1
username=pbx1
host=pbx2.ipt.yyy.com
[pbx3_inbound]
type=user
auth=rsa
inkeys=pbx3
username=pbx3_inbound
deny=0.0.0.0
permit=xxx.187.142.234
context=global_pbx_transfer
[pbx3_outbound]
type=peer
auth=rsa
outkey=pbx1
username=pbx3
host=pbx3.ipt.yyy.com
-----Original Message-----
From: George Vagenas
[mailto:[EMAIL PROTECTED]
Sent: Fri 3/24/2006 10:30 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc: George Vagenas
Subject: Re: [Asterisk-Users] SIP
trunk problem
Marty,
But with the same 128 bit
upstream circuit, directly connecting the SJPhone the Stun server and using
ulaw, everything is perfect. The problem comes when i am putting
Asterisk in the picture.
On 3/25/06, Martin
Joseph <[EMAIL PROTECTED]>
wrote:
On
Mar 24, 2006, at 1:19 PM, George Vagenas wrote:
> Hi
all,
>
> I have the following problem, working with
a SIP provider, if i setup
> my SJPhone to register directly to
their STUN server and working over
> a 384/128 ADSL i have a really
good quality, but then if i configure
> Asterisk to register to the
same provider over the same 384/128
> circuit the quality is REALLY
BAD. The obvious difference is that
> using directly the SJPhone i
am using STUN, while when i am using
> Asterisk to connect to my SIP
provider and the SJPhone to connect to
> Asterisk i have the
following configuration for
Asterisk.
>
>
> register => user:[EMAIL PROTECTED]
>
> [mysip]
> host=sip.provider.com
> type=peer
> qualify=yes
> username=user
> secret=pass
> nat=yes
> disallow=all
> allow=ulaw
>
>
> I
am using Asterisk 1.2.3.
>
> I think that i am
missing something or misconfigure something because
> for sure its
not matter of the ADSL since in both tests i am doing i
> am using
the same circuit.
>
> Any idea please????
I
don't think using ulaw on a 128K bit upstream circuit is a
good
choice. I would use g729.
Marty
PS I
can't be the stun server if asterisk is working, but quality
is
poor.
_______________________________________________
--Bandwidth
and Colocation provided by Easynews.com
--
Asterisk-Users mailing list
To UNSUBSCRIBE or update options
visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
