Melcon Moraes napisał(a):
IF all the things are right, at *CLI> "UC show channels" will show you
all the channels you have.
If in your unicall.conf you wrote "group = 1" along with "channels =>"
declaration, that range will belong to group 1 and you can use them
like Unicall/g1.
How many spans are you using? Are they T1 or E1?
E1, in e400p:
Detected Tormenta 2 Quad E1/PRI - E400P at 0xdfefe000/0xdfefb800 irq 177
Xilinx Chip successfully loaded, configured and started!!
Detected Card number: 0
Tor2: Launching card: 0
Registered Tormenta2 PCI
Registered tone zone 23 (Poland)
SPAN 1: Primary Sync Source
SPAN 1: Primary Sync Source
Registered tone zone 23 (Poland)
all 30 spans configured on the other side.
ztcfg -vv
Zaptel Configuration
======================
SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: CAS / User (Default) (Slaves: 01)
Channel 02: CAS / User (Default) (Slaves: 02)
Channel 03: CAS / User (Default) (Slaves: 03)
...
Channel 31: CAS / User (Default) (Slaves: 31)
31 channels configured.
# cat unicall.conf
[channels]
immediate=no
loglevel=255
protocolclass=mfcr2
protocolvariant=cz,20,7,31
protocolend=co
group = 1
context= default
channel => 1-15
channel => 17-31
Any hints?
--
Krzysztof Drewicz
<[EMAIL PROTECTED]>
+48 22 34 54 363
begin:vcard
fn:Krzysztof Drewicz
n:Drewicz;Krzysztof
adr;quoted-printable:;;Wybrze=C5=BCe Gdy=C5=84skie 6C;Warszawa;Mazowieckie;01-531;Polska
email;internet:[EMAIL PROTECTED]
tel;work:+48 22 34 54 363
tel;cell:+48 606 698 295
x-mozilla-html:TRUE
url:http://www.citicom.pl
version:2.1
end:vcard
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
