what im trying to do is:
remote_voip_gateway-------->asterisk----------->fox/fxs/and_international_voip_providers
call will always go -----> this way, no incoming calls from the right of the diagram side to asterisk.
On 3/23/06, Martin Joseph <
[EMAIL PROTECTED]> wrote:
On Mar 22, 2006, at 10:24 PM, Erick Perez wrote:
> Hi, does anybody have a working config or tips to connect the welltech
> wellgate 3804 (4fxo) unit to asterisk via SIP ?
> I think I register it via SIP with my * box, but when sending calls
> from * to the wellgate the unit does not pass the call to any of the
> fxo ports.
>
I am using the 3701a, which is a 1 FXO 1 FXS deal.
The trick for me was the "routing table" or something like that from
the Web based configuration screen. There I changed the default for
the FXO to point to IP, and the IP to default to the FXO.
Then I also have the "line configuration" set so the extension I want
to ring ie 2020 is the "hotline" for the FXO.
For outbound ones, I think I just have a regular old
Dial(SIP/[EMAIL PROTECTED] in my dialplan where 2003 is the FXO port.
HTH?
Marty
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
-------------------------------------------
Erick Perez
Linux User 376588
http://counter.li.org/ (Get counted!!!)
Panama, Republic of Panama
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
