On Fri, 14 Apr 2006, Kevin P. Fleming wrote:
What about a new line of Digium cards that have bridge cables that run
between the various cards and bypass the PCI bus? Since one of the best
aspects of using Asterisk is standards. This bridge cable should be
standardized and published so that other companies can adopt the
standard. For example an ISDN card could bridge to a Digium T1 card.
Or a card that supported legacy digital phones could bridge to other
cards.
That is called H.100, and it has existed for many years. It's also
ludicrously expensive to implement, so you won't see it on Digium cards
any time soon :-)
I heard that Junghanns is working on such an interconnection. It is
already possible to connect their PRI cards, and they are working on
BRI<->PRI.
I ise their bristuff for an HFC-S BRI card and am not happy at all with
the way they implemented timing, without applying the florz patch I have
lots of problems (lockups, lost line etc.)
My hesitation is with the driver, I think florz only fixes HFC-S if I
would run into similar trouble with PRI I would be in deep trouble.
But it would certainly fix faxing.
I have now ordered a TE210P and will try native bridging using a legacy
PBX for my faxing.
I hope this will solve my faxing nightmares. (I don't care if a solution
costs money, it just needs to work).
I think it would be a good idea if Digium would put some articles about
fax and possible solutions or work-arounds to fax problems on their
website.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
