Nicholas Kathmann wrote:
------------------------------------------------------------------------
Both hylafax and * are on the same machine and using the same PSTN
interfaces (whether T1 or TDM). It uses iaxmodem to communicate
between the two systems (imagine a softmodem). I'll create separate
extensions for the iaxmodems, then either map the numbers (or channels
off the TDM cards) to dial those extensions. You can also use the fax
extension on your default incoming to dial the iaxmodem. Faxgetty
then listens to the iaxmodem to receive faxes, and uses hylafax to
send them to the appropriate email addresses, printers, etc. In most
cases I'll set up separate PSTN numbers for incoming faxes, but the
fax extension also works relatively well. The only time I've ever
seen problems with faxes (or modems) is when trying to use a SIP or
IAX provider over the internet. To connect the analog fax machines
I'll either use a linksys PAP2
I've found the same success here as well. TE110P, Asterisk. iaxmodem
and HylaFAX. 332 pages in the last month with 1 failure. Had to tweak
the rxgains a little, but afterwards, it just works. Thanks Lee and Steve!
Doug
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
