In theory it should work, I have just written a proposal for someone that involves such a setup. in worst case I can always utilize the circuit as data, and use 2 asterisk boxes one on each end to convert it back to NI2.
On 4/18/06, Damon Estep <[EMAIL PROTECTED]> wrote: > > > > Looking for someone with a successful experience similar to this; > > > > I have a need to cross connect a 3COM NBX PBX PRI interface to asterisk, but > over a long distance. We do not need any IP connectivity and the solution > requires G.711u audio so there is no benefit to using IP. > > > > Has anyone here successfully cross connected any PBX PRI interface expecting > NI2 PRI signaling B8ZS/ESF with an asterisk box providing PRI_Network > signaling on a T1 interface card using a long haul point to point ESF/B8ZS > T1? > > > > I do not need the technical details on how to set up asterisk or the remote > PBX, just need a sanity check on the idea of using the PTP T1 as a cross > connect facility. If they were local to each other I would simply drop in a > T1 crossover cable, but they are not J > > > > Thanks! > > > > > > > > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users