On Fri, 21 Apr 2006, Klaus Darilion wrote: > On Fri, April 21, 2006 11:45, David Waugh said: > > 6. Difference between V-4BRI and 4BRI: As far as I understand the 4BRI > > is the better (more expensive) card which also offers FAX on/offramp. > > Nevertheless I can use V-4BRI for faxing when using spandsp. Both cards > > do support onboard echo cancellation. Are this assumptions correct? > > > > The difference between the Diva Server V-Series and the normal Diva > > Server cards is that you can only use the V-Series for Voice > > applications. You can not fax with a V-Series card. If you try and fax > > with a V-Series card you will get an error. > > Using spandsp and V-4BRI does not work?
That will work. It's just that the on-board fax capabilities won't work, but any other software fax will work like with other cards. > What about a pass-through scenario: > > PSTN <-2xBRI-> Asterisk <-2xBRI-> oldPBX No Problem! I have this running with 2 4BRI cards: PSTN <-4xBRI-> Asterisk/OpenPBX <-4xBRI NT-mode-> old PBX > Does Asterisk with the V-4BRI allows to pass through fax calls (or other > data calls) from the PSTN to the old PBX? Yes, but bridge=yes should be used to pass trough without Asterisk/CPU. > > 2. " ...install the isdn4k-utils-devel package...". What is isdn4k ? > > I'm a little bit confused about what I have to install. > > > > This is just a package that contains the capi.h file that is needed to > > compile the chan_capi-cm driver. > > btw: libcapi20-dev on debian ;-) exactly! Armin _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
