Hi Louis-David, Check without crc4
Best Regards, Francois BERGERET. -----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Louis-David Mitterrand Envoyé : dimanche 23 avril 2006 09:39 À : [email protected] Objet : [Asterisk-Users] TE410P card connection (was: Pinouts for T1/E1crossover cable) On Sat, Apr 22, 2006 at 11:59:21AM -0400, Alexander Lopez wrote: > Can't anyone stop self-promotion and tell the poor guy what he needs. > > A T1/E1 X-over cable using an RJ-45 (8-cond.) is pinned out as > follows: > > 1 - 4 > 2 - 5 > 3 - NU > 4 - 1 > 5 - 2 > 6 - NU > 7 - NU > 8 - NU > > NU = Not Used > > I have not in my experience seen any problems with using a Good > Quality Cat5 vs. Cat 3 (telco standard) cable for X-connects. YMMV, > but you should be fine. As far as the shielding goes, I use UTP cables > and Connectors all the time and some of my X-connects run over 100 > feet. Thanks for the info! Should I use a T1 cross cable to connect the telco's socket to the TE410P card? When I tried straight cat5 cables, both leds remained red at each end. However this E1 socket works fine with the Matra PBX, so it must be a cable problem or TE410P misconfiguration. Thanks, Here is my configuration: /etc/zaptel.conf: span=1,1,0,ccs,hdb3,crc4 span=2,1,0,ccs,hdb3,crc4 span=3,1,0,ccs,hdb3,crc4 span=4,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 bchan=32-46,48-62 dchan=47 bchan=63-77,79-93 dchan=78 bchan=94-108,110-124 dchan=109 loadzone=fr defaultzone=fr /etc/asterisk/zapata.conf: ;; to telco context=default signalling=pri_cpe group = 1 channel => 1-15 channel => 17-31 ;; to old pbx context=international signalling=pri_net group = 2 channel => 32-46 channel => 48-62 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
